This clipboard photo or artwork hanger is really easy to make… It is the perfect piece to display a favorite quote, hang a scheduling calendar or just to display a little one’s latest masterpiece! The best part about it is that it can be customized to match the décor in the home, and several can be made in a day!
Supplies:
2" x 2" sheet of 1/2" plywood
Clipboard clip (found at any craft store) with two 1/2" screws
Wood adhesive
Tools Needed:
Circular saw
Drill
Drill bit matching the diameter of the jewelry box pull
Step One
Cut the piece of plywood to 12 ½” x 16 ½”. Most home
improvement stores will do this for you. If you purchase a larger sheet of
plywood, you can get more than one base for the clipboard hanger.
Step Two
Secure the wood appliqués using the wood adhesive. I used a small flower medallion
and a pair of swirls.
You can use anything you’d like!
Step Three
Stain or paint the plywood piece. I used a one-step stain
and sealer in a dark brown using three coats.
Step Four
Spray paint the screw heads to match the clip, if necessary.
Position the clip in the center of the top end of the plywood, then drive the
screws in the holes to secure the clip in place.
Step Five
Mark the center of the very top edge of the plywood and
drill a shallow pilot hole. Insert the screw portion of the jewelry box pull to
hang the clipboard.
Add whatever you’d like to display to the clipboard photo or
artwork hanger and enjoy!
No comments:
Post a Comment