DIY Plans to Build a Round Top Side Table

This table is really, really easy to construct… With a round top and open frame legs, this table will look great in any room with any style! Four leg assemblies are created which are attached to a 2x2 hidden in the center. A round pre-made tabletop (available at most major home improvement retailers) is secured to the top of the legs creating a super-simple table!

Materials:

·         1-1/4” wood screws

·         1-1/2” wood screws

·         Wood glue

·         Sandpaper (100, 150, 220 grits)

·         Finishing supplies (primer & paint, or stain, sealer)

Lumber:

·         3 - 1x2 at 8’

·         1 - 2x2 at 2’

·         18” round table top

Cut List:

·         8 – 1x2 at 23-1/4” – Leg Framing

·         12 – 1x2 at 5-3/4” – Leg Framing

·         1 – 2x2 at 23-1/4” – Center Leg

Step One

Cut the pieces for the leg framing. Four assemblies will be created. Mark the position for the horizontal pieces on the vertical (longer) pieces and pre-drill the holes for the screws. The horizontal pieces are secured to the vertical pieces using glue and countersunk 1-1/2” screws.

Step Two

Once all of the leg assemblies are created, they will be attached to the 2x2 to create the table base. Secure two sets of the leg assemblies opposite each other to the 2x2 using glue and countersunk 1-1/4” screws.

Step Three

Secure the remaining leg assemblies to the 2x2 opposite each other using glue and countersunk 1-1/4” screws.

Step Four

Secure the top to the base using glue and countersunk 1-1/2” screws. The top will overhang the sides of the leg assemblies by 1”.

Finish as desired.